PRODUCTS
产品中心
| 详情介绍
用于聚丙烯、尼龙、聚氯乙烯、聚乙烯、聚苯乙烯和聚酯类等及低、中、高档塑料填料。
Applied in low, medium and high grades filled plastics such as polypylene,nylon, polyviny!
| 理化性能 Physic-chemical properties |
优等品 High quality product |
一级品 Class 1 product |
合格品 Qualified product |
|||||||
| 产品级别 Product grade |
塑料级 Plastic |
橡胶级 Rubber |
电缆级 Calbe |
塑料级 Plastic |
橡胶级 Rubber |
电缆级 Calbe |
塑料级 Plastic |
橡胶级 Rubber |
电缆级 Calbe |
|
| 白度(%) Whiteness(%) |
90.0 | 90.0 | 90.0 | 85.0 | 85.0 | 85.0 | 80.0 | 80.0 | 80.0 | |
| 细度,45μ m 通过率 ≥ Fineness 45μm Passing rate ≥ |
99.0 | 98.0 | 98.0 | 98.0 | 98.0 | 98.0 | 98.0 | 98.0 | 98.0 | |
| 水分 ≤ Moisture ≤ |
0.5 | 0.5 | 0.5 | 0.7 | 0.5 | 1.0 | ||||
| 二氧化硅 ≥ Silicon dioxide ≥ |
61.0 | 58.0 | 55.0 | |||||||
|
氧化镁 ≥ |
31.0 | 29.0 | 27.0 | |||||||
|
三氧化二铁 ≤ |
0.5 | 1.00 | 1.50 | |||||||
|
三氧化二铝 ≤ |
1.00 | 2.00 | 3.00 | |||||||
|
氧化钙 ≤ |
0.5 | 1.5 | 4.5 | |||||||
| 烧失量(1000℃) ≤ Loss of ignition(1000℃) ≤ |
6.00 | 7.00 | 6.00 | 8.00 | 9.00 | 8.00 | 9.00 | 24.0 | 10.0 | |
| PH | 8.0-10.0 | 8.0-10.0 | 8.0-10.0 | |||||||
| 酸溶物 ≤ Acid-soluble matter ≤ |
6.0 | 15.0 | 20.0 | |||||||
| 酸溶铁(以Fe203计) Acid-soluble iron(calculated by Fe203) |
1.00 | 0.2 | 2.00 | 0.50 | 3.00 | 1.0 | ||||
| 可溶铜 ≤ Soluble copper ≤ |
0.005 | 0.005 | 0.005 | |||||||
| 可溶锰 ≤ Soluble manganese ≤ |
0.05 | 0.05 | ||||||||
| 酸不溶物≥ Acid-insoluble matter≥ |
90.0 | 87.0 | 85.0 | |||||||
| 磁铁吸出物 ≤ Magnet aspirate ≤ |
0.04 | 0.07 | 0.10 | |||||||
|
体积密度 g/cm3 Volume density g/cm3 |
松密度 ≤ Loose density ≤ |
0.45 | 0.55 | 0.65 | ||||||
| 密度 ≤ Density ≤ |
0.90 | 0.95 | 1.00 | |||||||
| 留言咨询
注:请留下您的电子邮件地址,我们的专业人员将尽快与您联系!